.png)
Instructions for use:
1. Convenient, easy to operate and cost-effective, suitable for the connection of consumables of various materials.
2 Modify the heads of two consumables that need to be connected
3. One end penetrates from the large end of the connector to the score line, and the other end penetrates from the small end to the exposed 1-2mm. Suppress the excited heartbeat and light the lighter to 5-7 seconds (this time is mainly for ordinary PLA ABS, other harder consumables should be slightly longer)
4. The first thing to put down the lighter is to quickly push the consumables from the small end into the small hole of the big end, and slowly (must not be fast) full of expectations. When the connector is exposed, slowly pull it back and forth several times.
5. After the consumables are completely cooled, push the consumables completely from the small end until the interface can be easily repaired. Use small to trim the interface, test the effect after cleaning (bend the interface carefully and straighten it, then bend and straighten it), if you hear a clear sound, it means that our kung fu is still at home, and it is the only option. , Don't be sad. Actually, I don't feel well.
6. Unscrew the bolt at the end of the lug groove of the connecting piece, take out the consumables, and then assemble the connector for the next use.
Note: Do not use in environments with flammable and explosive gas and dust.
Package Included:
1 x 1.75mm/3.0mm Filament Break Connector
